rtl8188eu_parrotv1.1+ov5640验证通过RTL8188以备tinav2.1的需要_20170405_1423没有外层目录.7z下载

全志R16调通USB接口的WIFI：RTL8188CUv1.0版本.txt 2017/4/5 16:56 开发板：SC3817R OS/SDK：Android4.4.2/ParrotV1.1 测试步骤/请眼中注意：打开WIFI之前必须将 USB接口的WIFI：RTL8188CU插入到USB1中去，否则会死机！！！！切记！ 1、（如果SDK没有编译过，请跳过本次执行步骤！！！！） rootroot@cm-System-Product-Name:/home/wwt/rtl8188eu_parrotv1.1$ cd lichee/ rootroot@cm-System-Product-Name:/home/wwt/rtl8188eu_parrotv1.1/lichee$ ./build.sh config Welcome to mkscript setup progress All available chips: 0. sun8iw5p1 Choice: 0 All available platforms: 0. android 1. dragonboard 2. linux 3. tina Choice: 0 All available kernel: 0. linux-3.4 Choice: 0 All available boards: 0. bell-one 1. evb 2. evb-20 3. evb-30 4. evb-rtl8723bs 5. sc3813r Choice: 3 rootroot@cm-System-Product-Name:/home/wwt/rtl8188eu_parrotv1.1/lichee$ cd linux-3.4/ rootroot@cm-System-Product-Name:/home/wwt/rtl8188eu_parrotv1.1/lichee/linux-3.4$ make ARCH=arm menuconfig Device Drivers ---> [*] Network device support ---> [*] Wireless LAN ---> （其它的可以全部关闭的！！！！） Realtek 8188E USB WiFi 2、 Z:\home\wwt\rtl8188eu_parrotv1.1\android\device\softwinner\astar-evb30\BoardConfig.mk 关闭这里： #BOARD_WIFI_VENDOR := broadcom 打开这里： # wifi and bt configuration # 1. Wifi Configuration # 1.1 realtek wifi support # 1.1 realtek wifi configuration BOARD_WIFI_VENDOR := realtek ifeq ($(BOARD_WIFI_VENDOR), realtek) WPA_SUPPLICANT_VERSION := VER_0_8_X BOARD_WPA_SUPPLICANT_DRIVER := NL80211 BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_rtl BOARD_HOSTAPD_DRIVER := NL80211 BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_rtl SW_BOARD_USR_WIFI := rtl8188eu BOARD_WLAN_DEVICE := rtl8188eu #SW_BOARD_USR_WIFI := rtl8189es #BOARD_WLAN_DEVICE := rtl8189es #SW_BOARD_USR_WIFI := rtl8723bs #BOARD_WLAN_DEVICE := rtl8723bs endif 3、 Z:\home\wwt\rtl8188eu_parrotv1.1\android\device\softwinner\astar-evb30\init.sun8i.rc 关闭这里： #insmod /system/vendor/modules/bcm_btlpm.ko ## bluetooth # # UART device # chmod 0660 /dev/ttyS1 # chown bluetooth net_bt_stack /dev/ttyS1 # # # power up/down interface # chmod 0660 /sys/class/rfkill/rfkill0/state # chmod 0660 /sys/class/rfkill/rfkill0/type # chown bluetooth net_bt_stack /sys/class/rfkill/rfkill0/state # chown bluetooth net_bt_stack /sys/class/rfkill/rfkill0/type # write /sys/class/rfkill/rfkill0/state 0 # # # bluetooth LPM # chmod 0220 /proc/bluetooth/sleep/lpm # chmod 0220 /proc/bluetooth/sleep/btwrite # chown bluetooth net_bt_stack /proc/bluetooth/sleep/lpm # chown bluetooth net_bt_stack /proc/bluetooth/sleep/btwrite ## 2. broadcom wifi service ## 2.1 broadcom wifi station and softap #service wpa_supplicant /system/bin/wpa_supplicant \ # -iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf \ # -I/system/etc/wifi/wpa_supplicant_overlay.conf \ # -O/data/misc/wifi/sockets \ # -e/data/misc/wifi/entropy.bin -g@android:wpa_wlan0 # # we will start as root and wpa_supplicant will switch to user wifi # # after setting up the capabilities required for WEXT # # user wifi # # group wifi inet keystore # class main # socket wpa_wlan0 dgram 660 wifi wifi # disabled # oneshot # ## 2.2 broadcom wifi sta p2p concurrent service #service p2p_supplicant /system/bin/wpa_supplicant \ # -iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf \ # -I/system/etc/wifi/wpa_supplicant_overlay.conf \ # -O/data/misc/wifi/sockets -N \ # -ip2p0 -Dnl80211 -c/data/misc/wifi/p2p_supplicant.conf \ # -I/system/etc/wifi/p2p_supplicant_overlay.conf \ # -puse_p2p_group_interface=1 -e/data/misc/wifi/entropy.bin \ # -g@android:wpa_wlan0 # # we will start as root and wpa_supplicant will switch to user wifi # # after setting up the capabilities required for WEXT # # user wifi # # group wifi inet keystore # class main # socket wpa_wlan0 dgram 660 wifi wifi # disabled # oneshot 打开这里： # 1. realtek & eagle wifi service # 1.1 realtek & eagle wifi sta service service wpa_supplicant /system/bin/logwrapper /system/bin/wpa_supplicant \ -iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf \ -O/data/misc/wifi/sockets \ -e/data/misc/wifi/entropy.bin -g@android:wpa_wlan0 # we will start as root and wpa_supplicant will switch to user wifi # after setting up the capabilities required for WEXT # user wifi # group wifi inet keystore class main socket wpa_wlan0 dgram 660 wifi wifi disabled oneshot # 1.2 realtek & eagle wifi sta p2p concurrent service service p2p_supplicant /system/bin/logwrapper /system/bin/wpa_supplicant \ -ip2p0 -Dnl80211 -c/data/misc/wifi/p2p_supplicant.conf \ -e/data/misc/wifi/entropy.bin -N \ -iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf \ -O/data/misc/wifi/sockets \ -g@android:wpa_wlan0 class main socket wpa_wlan0 dgram 660 wifi wifi disabled oneshot #rtl8189es cob set macaddr #service engsetmacaddr /system/bin/setmacaddr /data/wifimac.txt # class main # oneshot 4、 Z:\home\wwt\rtl8188eu_parrotv1.1\android\device\softwinner\astar-evb30\astar_evb30.mk 关闭这里： # wifi features PRODUCT_COPY_FILES += \ frameworks/native/data/etc/android.hardware.wifi.xml:system/etc/permissions/android.hardware.wifi.xml \ frameworks/native/data/etc/android.hardware.wifi.direct.xml:system/etc/permissions/android.hardware.wifi.direct.xml #frameworks/native/data/etc/android.hardware.bluetooth.xml:system/etc/permissions/android.hardware.bluetooth.xml \ #frameworks/native/data/etc/android.hardware.bluetooth_le.xml:system/etc/permissions/android.hardware.bluetooth_le.xml # ap6181/6210/6330 sdio wifi fw and nvram #$(call inherit-product-if-exists, hardware/broadcom/wlan/firmware/ap6181/device-bcm.mk) #$(call inherit-product-if-exists, hardware/broadcom/wlan/firmware/ap6212/device-bcm.mk) #$(call inherit-product-if-exists, hardware/broadcom/wlan/firmware/ap6330/device-bcm.mk) #PRODUCT_PACKAGES += bt_vendor.conf \ # libbt-client-api \ # com.broadcom.bt \ # com.broadcom.bt.xml \ # com.dsi.ant.antradio_library \ # com.dsi.ant.antradio_library.xml \ # AntHalService \ # ANTRadioService PRODUCT_PACKAGES += com.dsi.ant.antradio_library \ com.dsi.ant.antradio_library.xml \ AntHalService \ ANTRadioService #PRODUCT_PACKAGES += Bluetooth 5、 Z:\home\wwt\rtl8188eu_parrotv1.1\android\device\softwinner\astar-evb30\overlay\frameworks\base\core\res\res\values\config.xml 关闭这里： "bt-pan" Z:\home\wwt\rtl8188eu_parrotv1.1\lichee\tools\pack\chips\sun8iw5p1\configs\evb-30\sys_config.fex 关闭这里： [wakeup_src_para] cpu_en = 0 cpu_freq = 48 ; (cpu:apb:ahb) pll_ratio = 0x111 dram_selfresh_en= 1 dram_freq = 36 wakeup_src_wl = port:PL07<4><0> ;wakeup_src_bt = port:PL09<4><0> bb_wake_ap = port:PL02<4><0> [usbc1] usb_used = 1 usb_drv_vbus_gpio = port:PD12<1><0><0> usb_restrict_gpio = usb_host_init_state = 0 usb_restric_flag = 0 usb_regulator_io = "nocare" usb_regulator_vol = 0 usb_not_suspend = 0 [rf_para] module_num = 3 module_power1 = "axp22_dldo1" module_power1_vol = 3300000 module_power2 = "axp22_dldo2" module_power2_vol = 3300000 module_power3 = "axp22_aldo1" module_power3_vol = 3300000 power_switch = chip_en = lpo_use_apclk = "losc_out" [bt_para] bt_used = 0 ;bt_uart_id = 1 ;bt_rst_n = port:PL08<1><0> ;bt_wake = port:PL10<1><0> ;bt_host_wake = port:PL09<4><0> ;bt_host_wake_invert = 0