VBA API 32 Serialport MT-SICS下载

Option Explicit '------------------------------------------------------------------------------- ' ' This VB module is a collection of routines to perform serial port I/O without ' using the Microsoft Comm Control component. This module uses the Windows API ' to perform the overlapped I/O operations necessary for serial communications. ' ' The routine can handle up to 4 serial ports which are identified with a ' Port ID. ' ' All routines (with the exception of CommRead and CommWrite) return an error ' code or 0 if no error occurs. The routine CommGetError can be used to get ' the complete error message. '------------------------------------------------------------------------------- '------------------------------------------------------------------------------- ' Public Constants '------------------------------------------------------------------------------- ' Output Control Lines (CommSetLine) Const LINE_BREAK = 1 Const LINE_DTR = 2 Const LINE_RTS = 3 ' Input Control Lines (CommGetLine) Const LINE_CTS = &H10& Const LINE_DSR = &H20& Const LINE_RING = &H40& Const LINE_RLSD = &H80& Const LINE_CD = &H80& '------------------------------------------------------------------------------- ' System Constants '------------------------------------------------------------------------------- Private Const ERROR_IO_INCOMPLETE = 996& Private Const ERROR_IO_PENDING = 997 Private Const GENERIC_READ = &H80000000 Private Const GENERIC_WRITE = &H40000000 Private Const FILE_ATTRIBUTE_NORMAL = &H80 Private Const FILE_FLAG_OVERLAPPED = &H40000000 Private Const FORMAT_MESSAGE_FROM_SYSTEM = &H1000 Private Const OPEN_EXISTING = 3 ' COMM Functions Private Const MS_CTS_ON = &H10& Private Const MS_DSR_ON = &H20& Private Const MS_RING_ON = &H40& Private Const MS_RLSD_ON = &H80& Private Const PURGE_RXABORT = &H2 Private Const PURGE_RXCLEAR = &H8 Private Const PURGE_TXABORT = &H1 Private Const PURGE_TXCLEAR = &H4 ' COMM Escape Functions Private Const CLRBREAK = 9 Private Const CLRDTR = 6 Private Const CLRRTS = 4 Private Const SETBREAK = 8 Private Const SETDTR = 5 Private Const SETRTS = 3 '------------------------------------------------------------------------------- ' System Structures '------------------------------------------------------------------------------- Private Type COMSTAT fBitFields As Long ' See Comment in Win32API.Txt cbInQue As Long cbOutQue As Long End Type Private Type COMMTIMEOUTS ReadIntervalTimeout As Long ReadTotalTimeoutMultiplier As Long ReadTotalTimeoutConstant As Long WriteTotalTimeoutMultiplier As Long WriteTotalTimeoutConstant As Long End Type ' ' The DCB structure defines the control setting for a serial ' communications device. ' Private Type DCB DCBlength As Long BaudRate As Long fBitFields As Long ' See Comments in Win32API.Txt wReserved As Integer XonLim As Integer XoffLim As Integer ByteSize As Byte Parity As Byte StopBits As Byte XonChar As Byte XoffChar As Byte ErrorChar As Byte EofChar As Byte EvtChar As Byte wReserved1 As Integer 'Reserved; Do Not Use End Type Private Type OVERLAPPED Internal As Long InternalHigh As Long offset As Long OffsetHigh As Long hEvent As Long End Type Private Type SECURITY_ATTRIBUTES nLength As Long lpSecurityDescriptor As Long bInheritHandle As Long End Type '------------------------------------------------------------------------------- ' System Functions '------------------------------------------------------------------------------- ' ' Fills a specified DCB structure with values specified in ' a device-control string. ' Private Declare Function BuildCommDCB Lib "kernel32" Alias "BuildCommDCBA" _ (ByVal lpDef As String, lpDCB As DCB) As Long ' ' Retrieves information about a communications error and reports ' the current status of a communications device. The function is ' called when a communications error occurs, and it clears the ' device's error flag to enable additional input and output ' (I/O) operations. ' Private Declare Function ClearCommError Lib "kernel32" _ (ByVal hFile As Long, lpErrors As Long, lpStat As COMSTAT) As Long ' ' Closes an open communications device or file handle. ' Private Declare Function CloseHandle Lib "kernel32" (ByVal hObject As Long) As Long ' ' Creates or opens a communications resource and returns a handle ' that can be used to access the resource. ' Private Declare Function CreateFile Lib "kernel32" Alias "CreateFileA" _ (ByVal lpFileName As String, ByVal dwDesiredAccess As Long, _ ByVal dwShareMode As Long, lpSecurityAttributes As Any, _ ByVal dwCreationDisposition As Long, ByVal dwFlagsAndAttributes As Long, _ ByVal hTemplateFile As Long) As Long ' ' Directs a specified communications device to perform a function. ' Private Declare Function EscapeCommFunction Lib "kernel32" _ (ByVal nCid As Long, ByVal nFunc As Long) As Long ' ' Formats a message string such as an error string returned ' by anoher function. ' Private Declare Function FormatMessage Lib "kernel32" Alias "FormatMessageA" _ (ByVal dwFlags As Long, lpSource As Any, ByVal dwMessageId As Long, _ ByVal dwLanguageId As Long, ByVal lpBuffer As String, ByVal nSize As Long, _ Arguments As Long) As Long ' ' Retrieves modem control-register values. ' Private Declare Function GetCommModemStatus Lib "kernel32" _ (ByVal hFile As Long, lpModemStat As Long) As Long ' ' Retrieves the current control settings for a specified ' communications device. ' Private Declare Function GetCommState Lib "kernel32" _ (ByVal nCid As Long, lpDCB As DCB) As Long ' ' Retrieves the calling thread's last-error code value. ' Private Declare Function GetLastError Lib "kernel32" () As Long ' ' Retrieves the results of an overlapped operation on the ' specified file, named pipe, or communications device. ' Private Declare Function GetOverlappedResult Lib "kernel32" _ (ByVal hFile As Long, lpOverlapped As OVERLAPPED, _ lpNumberOfBytesTransferred As Long, ByVal bWait As Long) As Long ' ' Discards all characters from the output or input buffer of a ' specified communications resource. It can also terminate ' pending read or write operations on the resource. ' Private Declare Function PurgeComm Lib "kernel32" _ (ByVal hFile As Long, ByVal dwFlags As Long) As Long ' ' Reads data from a file, starting at the position indicated by the ' file pointer. After the read operation has been completed, the ' file pointer is adjusted by the number of bytes actually read, ' unless the file handle is created with the overlapped attribute. ' If the file handle is created for overlapped input and output ' (I/O), the application must adjust the position of the file pointer ' after the read operation. ' Private Declare Function ReadFile Lib "kernel32" _ (ByVal hFile As Long, ByVal lpBuffer As String, _ ByVal nNumberOfBytesToRead As Long, ByRef lpNumberOfBytesRead As Long, _ lpOverlapped As OVERLAPPED) As Long ' ' Configures a communications device according to the specifications ' in a device-control block (a DCB structure). The function ' reinitializes all hardware and control settings, but it does not ' empty output or input queues. ' Private Declare Function SetCommState Lib "kernel32" _ (ByVal hCommDev As Long, lpDCB As DCB) As Long ' ' Sets the time-out parameters for all read and write operations on a ' specified communications device. ' Private Declare Function SetCommTimeouts Lib "kernel32" _ (ByVal hFile As Long, lpCommTimeouts As COMMTIMEOUTS) As Long ' ' Initializes the communications parameters for a specified ' communications device. ' Private Declare Function SetupComm Lib "kernel32" _ (ByVal hFile As Long, ByVal dwInQueue As Long, ByVal dwOutQueue As Long) As Long ' ' Writes data to a file and is designed for both synchronous and a ' synchronous operation. The function starts writing data to the file ' at the position indicated by the file pointer. After the write ' operation has been completed, the file pointer is adjusted by the ' number of bytes actually written, except when the file is opened with ' FILE_FLAG_OVERLAPPED. If the file handle was created for overlapped ' input and output (I/O), the application must adjust the position of ' the file pointer after the write operation is finished. ' Private Declare Function WriteFile Lib "kernel32" _ (ByVal hFile As Long, ByVal lpBuffer As String, _ ByVal nNumberOfBytesToWrite As Long, lpNumberOfBytesWritten As Long, _ lpOverlapped As OVERLAPPED) As Long Private Declare Sub AppSleep Lib "kernel32" Alias "Sleep" (ByVal dwMilliseconds As Long) '------------------------------------------------------------------------------- ' Program Constants '------------------------------------------------------------------------------- Private Const MAX_PORTS = 4 '------------------------------------------------------------------------------- ' Program Structures '------------------------------------------------------------------------------- Private Type COMM_ERROR lngErrorCode As Long strFunction As String strErrorMessage As String End Type Private Type COMM_PORT lngHandle As Long blnPortOpen As Boolean udtDCB As DCB End Type '------------------------------------------------------------------------------- ' Program Storage '------------------------------------------------------------------------------- Private udtCommOverlap As OVERLAPPED Private udtCommError As COMM_ERROR Private udtPorts(1 To MAX_PORTS) As COMM_PORT '------------------------------------------------------------------------------- ' GetSystemMessage - Gets system error text for the specified error code. '------------------------------------------------------------------------------- Public Function GetSystemMessage(lngErrorCode As Long) As String Dim intPos As Integer Dim strMessage As String, strMsgBuff As String * 256 Call FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM, 0, lngErrorCode, 0, strMsgBuff, 255, 0) intPos = InStr(1, strMsgBuff, vbNullChar) If intPos > 0 Then strMessage = Trim$(Left$(strMsgBuff, intPos - 1)) Else strMessage = Trim$(strMsgBuff) End If GetSystemMessage = strMessage End Function Public Function PauseApp(PauseInSeconds As Long) Call AppSleep(PauseInSeconds * 1000) End Function '------------------------------------------------------------------------------- ' CommOpen - Opens/Initializes serial port. ' ' ' Parameters: ' intPortID - Port ID used when port was opened. ' strPort - COM port name. (COM1, COM2, COM3, COM4) ' strSettings - Communication settings. ' Example: "baud=9600 parity=N data=8 stop=1" ' ' Returns: ' Error Code - 0 = No Error. ' '------------------------------------------------------------------------------- Public Function CommOpen(intPortID As Integer, strPort As String, _ strSettings As String) As Long Dim lngStatus As Long Dim udtCommTimeOuts As COMMTIMEOUTS On Error GoTo Routine_Error ' See if port already in use. If udtPorts(intPortID).blnPortOpen Then lngStatus = -1 With udtCommError .lngErrorCode = lngStatus .strFunction = "CommOpen" .strErrorMessage = "Port in use." End With GoTo Routine_Exit End If ' Open serial port. udtPorts(intPortID).lngHandle = CreateFile(strPort, GENERIC_READ Or _ GENERIC_WRITE, 0, ByVal 0&, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, 0) If udtPorts(intPortID).lngHandle = -1 Then lngStatus = SetCommError("CommOpen (CreateFile)") GoTo Routine_Exit End If udtPorts(intPortID).blnPortOpen = True ' Setup device buffers (1K each). lngStatus = SetupComm(udtPorts(intPortID).lngHandle, 1024, 1024) If lngStatus = 0 Then lngStatus = SetCommError("CommOpen (SetupComm)") GoTo Routine_Exit End If ' Purge buffers. lngStatus = PurgeComm(udtPorts(intPortID).lngHandle, PURGE_TXABORT Or _ PURGE_RXABORT Or PURGE_TXCLEAR Or PURGE_RXCLEAR) If lngStatus = 0 Then lngStatus = SetCommError("CommOpen (PurgeComm)") GoTo Routine_Exit End If ' Set serial port timeouts. With udtCommTimeOuts .ReadIntervalTimeout = -1 .ReadTotalTimeoutMultiplier = 0 .ReadTotalTimeoutConstant = 1000 .WriteTotalTimeoutMultiplier = 0 .WriteTotalTimeoutMultiplier = 1000 End With lngStatus = SetCommTimeouts(udtPorts(intPortID).lngHandle, udtCommTimeOuts) If lngStatus = 0 Then lngStatus = SetCommError("CommOpen (SetCommTimeouts)") GoTo Routine_Exit End If ' Get the current state (DCB). lngStatus = GetCommState(udtPorts(intPortID).lngHandle, _ udtPorts(intPortID).udtDCB) If lngStatus = 0 Then lngStatus = SetCommError("CommOpen (GetCommState)") GoTo Routine_Exit End If ' Modify the DCB to reflect the desired settings. lngStatus = BuildCommDCB(strSettings, udtPorts(intPortID).udtDCB) If lngStatus = 0 Then lngStatus = SetCommError("CommOpen (BuildCommDCB)") GoTo Routine_Exit End If ' Set the new state. lngStatus = SetCommState(udtPorts(intPortID).lngHandle, _ udtPorts(intPortID).udtDCB) If lngStatus = 0 Then lngStatus = SetCommError("CommOpen (SetCommState)") GoTo Routine_Exit End If lngStatus = 0 Routine_Exit: CommOpen = lngStatus Exit Function Routine_Error: lngStatus = Err.Number With udtCommError .lngErrorCode = lngStatus .strFunction = "CommOpen" .strErrorMessage = Err.Description End With Resume Routine_Exit End Function Private Function SetCommError(strFunction As String) As Long With udtCommError .lngErrorCode = Err.LastDllError .strFunction = strFunction .strErrorMessage = GetSystemMessage(.lngErrorCode) SetCommError = .lngErrorCode End With End Function Private Function SetCommErrorEx(strFunction As String, lngHnd As Long) As Long Dim lngErrorFlags As Long Dim udtCommStat As COMSTAT With udtCommError .lngErrorCode = GetLastError .strFunction = strFunction .strErrorMessage = GetSystemMessage(.lngErrorCode) Call ClearCommError(lngHnd, lngErrorFlags, udtCommStat) .strErrorMessage = .strErrorMessage & " COMM Error Flags = " & _ Hex$(lngErrorFlags) SetCommErrorEx = .lngErrorCode End With End Function